Overview - Seat Angle Adjuster
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- Quantity: 2
- Not available separately from the repair kit. Refer to the Parts Information.
- Self-locking
- Always replace after removing
- Threaded holes for the bolts must be cleaned, for example, with a thread tap
- 10 Nm
- Seat Angle Adjustment Motor
- Removing and installing. Refer to SEAT ANGLE ADJUSTER, REMOVING AND INSTALLING .
- Bolt
- Self-locking
- Not available separately from the repair kit. Refer to the Parts Information.
- Always replace after removing
- Clean the threaded hole for the bolt with a thread tap, for example
- 20 Nm
- Adjustment Shaft