Multimedia System Display Unit Support, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the multimedia system display unit.
-- Unclip the trim -1- using the Trim Removal Wedge :3409 -arrows- and remove.
-- Remove the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Secure the front seat to the Engine/Transmission Holder - Seat Repair Fixture :VAS 6136 . Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .
-- Remove the backrest seat cover and cushion. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING .
-- Unclip the bracket -1- for the electrical wiring at the support.
-- Unclip the connector -2- at the support.
-- Remove the bolts -arrows- and the support -3-.