Front Seat Fan, Removing And Installing, Seat Cushion: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Secure the front seat to the Engine/Transmission Holder - Seat Repair Fixture :VAS 6136 . Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .
CAUTION:
Risk of injury due to flying metal shavings.
Irritation and injury to skin and eyes possible.
- Wear protective eyewear.
- Wear safety gloves.
-- Drill out the pop rivets -arrows- or separate them using the mini-grinder.
-- Remove the cover -1- for the fan.
-- Disconnect the connector -1-.
-- Disengage the tabs -2- on the rubber boot from the seat cushion fan.
-- Spray the rubber fasteners -arrows- for the elastic fan bracket with silicone-free lubricating spray and remove the fan from the rubber fasteners.
-- Remove the fan.