Backrest Cover, Removing And Installing, Standard/Sport Seat: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the front seat to the middle position and move the backrest into the upright position.
CAUTION:
There is a risk of injury from sharp edges.
Hand injuries are possible.
- Wear safety gloves.
-- Reach behind the backrest cover -1- and forcefully press the side of it toward the rear to remove it from the backrest frame.
TIP:
If this is difficult, loosen the side hooks with a Pry Lever :80-200 .
-- Repeat the procedure on the opposite side.
-- Continue to remove the backrest cover and roll it up until the upper catches detach from the backrest frame.
-- Remove the backrest cover upward from the catches on the bottom of the backrest frame -2-.