LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 314 (Seat Frames) >> 72 Seat Frames >> Front Seats >> Backrest Cover, Removing And Installing >> Backrest Cover, Removing And Installing, Comfort Seat >> Removing

Backrest Cover, Removing And Installing, Comfort Seat: Removing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Move the front seat to the middle position and as high as possible, and move the backrest into the upright position.

-- Disengage the tensions traps -arrows- on the bottom of the seat pan.

GWWA72-12608Courtesy of AUDI OF AMERICA, LLC

-- Reach behind the backrest cover -1- and forcefully press the side of it toward the rear to remove it from the backrest frame -arrow A-.

GWWA72-12609Courtesy of AUDI OF AMERICA, LLC

-- Repeat the procedure on the opposite side -arrow B-.

-- Continue removing the backrest cover until the lower catches are released from the backrest frame -arrow C-.

-- If necessary, disengage the lower catches -1- with a large flat-head screwdriver from the backrest frame -arrow-.

GWWA72-12730Courtesy of AUDI OF AMERICA, LLC

-- Pull the backrest cover -1- up out of the hook on the backrest frame and remove it.

GWWA72-12625Courtesy of AUDI OF AMERICA, LLC

-- To do this, press forward forcefully on the upper backrest cover in the locations shown, press against the backrest -A arrows-, and remove the backrest cover downward from the backrest at the same time -arrow B-.