Pneumatic Lines, Disconnecting And Connecting
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Hose Cutting Pliers :VAS 6228
- Pneumatic Repair Set - Pliers :VAS 6618/1 (quantity: 2)
Pneumatic Line, Cutting
-- Position the Hose Cutting Pliers :VAS 6228 at a right angle and cut the pneumatic line -1-.
Pneumatic Line, Connecting
-- Slide the pneumatic lines -1- and -3- onto the line connector -2- on both sides using the Pneumatic Repair Set - Pliers :VAS 6618/1 . Refer to the Parts Information.
-- Pull on the pneumatic lines to make sure they are connected completely.