LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 314 (Seat Frames) >> 72 Seat Frames >> Front Seat Pneumatic System >> Massage Mat, Removing And Installing >> Removing

Massage Mat, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Separate the cover and cushion. Refer to BACKREST COVER AND CUSHION, SEPARATING .

-- If necessary, loosen the bottom of the heating element -1- from the adhesive in the area of the center cushion.

GWWA72-12629Courtesy of AUDI OF AMERICA, LLC

-- Fold back or lift up the foam pieces -2, 3, and 4- with heating element -arrows-. Loosen from the adhesive if necessary.

-- Remove the clips -arrows-.

GWWA72-12630Courtesy of AUDI OF AMERICA, LLC

-- Thread the pneumatic lines and pneumatic line connectors out of the cushion at the top and bottom.

-- Remove the massage mat -1-.