Component Location Overview - Seals

WARNING: This page is about a different car, the 2024 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Seals Components Location Overview

Courtesy of AUDI OF AMERICA, LLC

Seal
- For the torque converter
- Replacing. Refer to TORQUE CONVERTER SEAL, REMOVING AND INSTALLING .
Left Seal
- For the flange shaft
- Replacing. Refer to LEFT SEAL, REPLACING .
O-Ring
- On the front final drive cover
- Replacing. Refer to O-RING ON FRONT FINAL DRIVE COVER, REMOVING AND INSTALLING .
Front Final Drive Cover
- Removing and installing. Refer to O-RING ON FRONT FINAL DRIVE COVER, REMOVING AND INSTALLING .
Right Seal
- For the flange shaft
- Replacing. Refer to RIGHT SEAL, REPLACING .
Seal
- For the transmission output shaft.
- Replacing. Refer to TRANSMISSION OUTPUT SHAFT SEAL, REPLACING
Seal
- For the parking lock emergency release shaft
- Replacing. Refer to PARKING LOCK SHAFT SEAL, REPLACING .
Transmission