Window Guide, Removing And Installing: Installing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Install the window guide -B- on the door flange in the sequence -1 through 6-.

Courtesy of AUDI OF AMERICA, LLC

Step
1.	-- Position the upper window guide corner -A- on the B-pillar door flange and align it with the B-pillar trim by installing the B-pillar trim without using screws. Refer to B-PILLAR DOOR TRIM, REMOVING AND INSTALLING, REAR .
2.	-- Position the upper window guide corner -C- on the C-pillar door flange and align it with the C-pillar trim by installing the C-pillar trim without using screws. Refer to DOOR C-PILLAR TRIM, REMOVING AND INSTALLING .
3.	-- Push on the upper window guide, working from the outside toward the inside.
	Fold the window guide sealing lip over the inside of the door flange.
4.	-- Align the window guide -D- on the B-pillar guide rail and insert it into the guide rail.
5.	-- Align the window guide -E- on the C-pillar guide rail and insert it into the guide rail.
6.	-- Slide the inner window shaft strip -F- on the door flange.