LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 310 (Rear Doors) >> 58 Rear Doors >> Door Components >> Trim Molding Cap, Removing And Installing >> Installing

Trim Molding Cap, Removing And Installing: Installing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- When mounting the trim molding, make sure the guides -3- grip into the mounts.

scientia non olet · About LEMON Manuals