Steering Column Switch Module, Removing And Installing: Notes
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
The Steering Column Electronics Control Module -J527- with the Spiral Spring -F350- is integrated into the steering column switch module.
If the steering column switch module must be replaced, the following progress applies:
-- Connect the => .
-- Select the Diagnostic mode and start the diagnosis.
-- Select the Test plan tab.
-- Select the Select individual test button and select the following tree structure consecutively:
- Diagnostic-capable systems
- 0009 - Vehicle Electrical System Control Module - J519
- 0009 - Steering Column Electronics Control Module - J527
- J527 - Steering Column Electronics Control Module, Replacing
-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.