High-Mounted Brake Lamp Bulb -M25-, REMOVING AND INSTALLING, SEDAN: Installing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- The entire high-mounted brake lamp must be replaced if an LED is faulty.
-- The mount -2- for the high-mounted brake lamp -3- must engage evenly at the left and right in the guide rails -1-.
-- Slide the high-mounted brake lamp evenly forward in the direction of travel without tilting it until it engages audibly in the direction of -arrows-.