Plenum Chamber Cover, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the windshield wiper arms. Refer to WIPER ARMS, REMOVING AND INSTALLING, VEHICLES WITHOUT WINDSHIELD WIPER WITH INTEGRATED WASHER NOZZLES .
-- Remove gasket -2-.
-- Coat the transition between the frame -3- and the plenum chamber cover -1- with soapy water.
-- Remove the plenum chamber cover from the window edge vertically upward starting from the frame on the windshield in direction of -arrow-.