Side Spoiler, Removing And Installing: Installing

Install in the reverse order of removal while noting the following:

• The vehicle and the bracket must be at room temperature.
• The adhesive surfaces must be free of dirt and grease.

-- Clean the adhesive surfaces using the Cleaning Solution:D 009 401 04  .

-- Fold back the ends of the protective film, or attach a pulling aid -4 and 6- to the protective film.

Courtesy of AUDI OF AMERICA, LLC

-- Position the side spoiler -3- at the top of the rear lid with the clip -5- and push it over the stop ridge -2- at the bottom to the stop on the rear lid -1-.

-- Remove the protective film from the pulling aid and from the adhesive tape.

-- Push the entire length of the side spoiler on using the Roller:T40400  .

• Resting time approximately 30 minutes at room temperature