Driveshaft Heat Shield, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the center muffler. Refer to MUFFLER, REMOVING AND INSTALLING (EA 888EVO4) , or MUFFLER, REMOVING AND INSTALLING (EA 839) .
-- Remove the front and rear tunnel bridge. Refer to TUNNEL BRACE, REMOVING AND INSTALLING .
-- Remove the heat shield -1- in direction of -arrow-.