Transport And Storage

• Pay attention to country-specific transport and storage requirements.
• Pay attention to component specific transport and storage requirements.

Storage guidelines:

Passenger Protection Components:

• Do not allow the airbag units to come into contact with grease, solvents, or cleaning solutions.
• Do not expose gas generators to temperatures above 100 °C (212 °F).
• Store uninstalled driver and front passenger airbag units with the airbag deployment opening facing up.
• Place removed airbag units into a transport container or onto a clean, level surface with a soft cushion underneath. Fold carefully and prevent damages.
• Pressure sensors must be protected from moisture when storing.

Transport guidelines:

Components containing liquids:

• Components containing liquids must be drained before transport. If it is not possible to drain the component, then the parts must be packed properly.
• If a fault prevents draining the component, then contact the importer.
• The connection openings of the components containing liquids must immediately be closed after removal or draining of remaining liquids. If available, use the plugs from the new part.