Gear Set, Disassembling And Assembling: Notes
WARNING: This page is about a different car, the 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Bearing Installer - Differential Bearing:40-21
- Press Piece - Trailing Arm:2010
- Inductive Heater:VAS 6414
- Press Plate:VW402
- Press Piece - Multiple Use:VW412
- Press Piece - Multiple Use:VW519
Special tools and workshop equipment required
- Thrust Piece:T10431/1
- Gearbox Assembly Tool:T40213A
- Socket - Xzn 18mm:T10162A
- Press Piece - Multiple Use:30-11
- Press Piece - 31.5mm:VW418A
- Hydraulic Press:VAS 6178
Special tools and workshop equipment required
- Press Piece - Multiple Use:VW426
- Bearing Installer - Multiple Use:32-111
- Press Piece - Rod:VW407
- Bearing Installer - Bearing Press Plate:T10084A
- Press Plate:VW401
- Press Piece - Multiple Use:40-105
Special tools and workshop equipment required
- Valve Guide/Clutch Release Push Rod Seal Drift:10-206
- Press Piece - Rod:VW408A
- Exhaust Pipe Wedge Set:3140A
- Hot Air Blower:V.A.G 1416 or Wiring Harness Repair Set - Hot Air Blower: VAS 1978/14A
- Two-Arm Puller:VAS 251 001
- Thrust Piece:T10205/13 from the Bearing Installer - Wheel Hub/Bearing Kit:T10205A
- Extracting Tool:T40413
Disassembling
- Gear set removed. Refer to TRANSMISSION, DISASSEMBLING AND ASSEMBLING .
- Oil pan removed OVERVIEW - GEAR SET, VEHICLES WITHOUT SELF-LOCKING CENTER DIFFERENTIAL => List Item:Oil Pan.