Overview - Charge Air System, 3.0L Engine, Body Side
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Charge Air Cooler
- Removing and Installing. Refer to CHARGE AIR COOLER, REMOVING AND INSTALLING .
- If there are small impressions on the slats. Refer to appropriate Repair Information .
- Air Duct Hose
- Must be free of oil and grease before installing
- From the Turbocharger
- To Intake Manifold
- Seal
- Replace if damaged
- Charge Air Pressure Sensor -G31-
- Removing and Installing. Refer to Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING .
- Bolt
- 7 Nm
- Repair solution for broken catch
- Thread cutting
- Position the bolt by hand and tighten it until it finds the old threads. Then tighten the bolt to the specification.
- O-Ring
- Not available separately; replace if leaking -item 6- OVERVIEW - CHARGE AIR SYSTEM, 3.0L ENGINE, BODY SIDE => List Item:Charge Air Pressure Sensor -G31-
- Air Duct Pipe
- Must be free of oil and grease before installing
- Seal
- Replace if damaged