Charge Air Cooler, Removing And Installing, 3.0L Engine: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Pay attention to the guidelines for clean working conditions. Refer to appropriate Repair Information .
-- Remove the lock carrier cover and the bumper cover end plate. Refer to OVERVIEW - BUMPER COVER .
-- Release the catches -arrow- and remove the air ducts -1 and 3-.
-- Loosen the left and right hose clamp -1- and remove the air duct pipe from the charge air cooler.
-- Release the retainers in direction of -arrows- on the left and right sides and disengage the charge air cooler from the radiator.
-- Remove the charge air cooler downward.