Charge Air Cooler, Removing And Installing, 2.9L Engine: Installing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.
- Check the vacuum hoses for damage before the assembly and replace if necessary.
- Used coolant cannot be used again.
-- Install the left auxiliary radiator. Refer to LEFT AUXILIARY RADIATOR, REMOVING AND INSTALLING .
-- Install the bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Install the left headlamp. Refer to HEADLAMP HOUSING, REMOVING AND INSTALLING .
-- Connect the coolant hose to the connector coupling. Refer to Figure.
-- Fill with coolant. Refer to Coolant, Filling .