Upper Air Duct Pipe, Removing And Installing, 3.0L Engine: Installing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Replace the seals and O-rings after removal.
- Check the O-ring of the crankcase ventilation for damage. Refer to appropriate Repair Information .
- Replace bolts that were tightened with an additional turn after removing them.
- Secure all hose connections with hose clamps that match the ones used in series production. Refer to the appropraite Parts Information.
-- Install the Throttle Valve Control Module -GX3-. Refer to Throttle Valve Control Module -GX3-, REMOVING AND INSTALLING .
-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .