A/C Compressor Ribbed Belt, Removing And Installing, 2.9L Engine With Radiator Installed: Removing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation. Refer to appropriate service information .

-- Remove the bolts -arrows- and press the coolant pipe -1- to the rear on the lock carrier.

Courtesy of AUDI OF AMERICA, LLC

-- Position the Driveshaft Handle:3145 as shown on the ribbed belt and on the oil pan flange.

Courtesy of AUDI OF AMERICA, LLC

-- Pivot the counterholder counter-clockwise only until the tensioner -1- can be locked using the Locking Pin:T10060A .

TIP:

Insert the Locking Pin:T10060A with needle nose pliers (long version).

-- Remove the ribbed belt.