A/C Compressor Ribbed Belt, Removing And Installing, 2.9L Engine With Radiator Installed: Notes

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Complete procedure, if the radiator is NOT removed due to preliminary work.

Special tools and workshop equipment required

Driveshaft Handle: 3145

Courtesy of AUDI OF AMERICA, LLC
Hose Clip Pliers:VAS6362

Fig 1: Hose Clip Pliers
Courtesy of AUDI OF AMERICA, LLC
Locking Pin:T10060A

Fig 2: Identifying Locking Pin
Courtesy of AUDI OF AMERICA, LLC
Brake Piston Retraction Tool:T40142

Fig 3: Brake Piston Retraction Tool T140142
Courtesy of AUDI OF AMERICA, LLC
Straight needle nose pliers, long version, commercially available
M8 x 30 Bolt
M8 Nut
M10x40 bolt
M10 nut (quantity: 2)

Driveshaft Handle:3145 Preparing

Courtesy of AUDI OF AMERICA, LLC

-- Secure the Brake Piston Retraction Tool:T40142 as shown with an M8x30 bolt -item 1- and M10x40 bolt -item 2- on the Driveshaft Handle:3145 .

-- Tighten the nuts -arrows-.