LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 300 (Crankshaft, Cylinder Block (6-Cylinder Direct Fuel Injection 2.9L; 3.0L 4V TFSI Engine Ea 839)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Ribbed Belt TENSIONER, Removing And Installing >> Ribbed Belt TENSIONER, Removing And Installing, A/C Compressor For 2.9L Engine >> Installing

Ribbed Belt TENSIONER, Removing And Installing, A/C Compressor For 2.9L Engine: Installing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Install the ribbed belt tensioner for the starter generator. Refer to RIBBED BELT TENSIONER, REMOVING AND INSTALLING .

-- Install the ribbed belt for the A/C compressor. Refer to RIBBED BELT, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals