Engine Support, Removing And Installing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Left Engine Support, Removing

-- Remove the left engine mount. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and the engine support -1-.

Courtesy of AUDI OF AMERICA, LLC

Right Engine Support, Removing

Fig 1: Right Coolant Pipe

Courtesy of AUDI OF AMERICA, LLC

-- Remove the engine mount. Refer to RIGHT ENGINE MOUNT, REMOVING AND INSTALLING .

-- Remove the bolt -2- and press the coolant pipe on the right side of the engine -3- to the side slightly.

-- Remove the bolts -arrows- and the engine support -1-.

Courtesy of AUDI OF AMERICA, LLC

Installing

Install in the reverse order of removal while noting the following:

-- If removed, install the engine mount. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .

-- If lowered, install the subframe. Refer to appropriate Repair Information .

Tightening Specifications

Refer to OVERVIEW - ASSEMBLY MOUNTS
Refer to Fig 2

Fig 2: Right Coolant Pipe

Courtesy of AUDI OF AMERICA, LLC