Windshield Wiper, Bringing Into Service Position
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- If the windshield wiper motor is to be run during the procedure, the front lid must be completely closed, otherwise the power supply to the wiper motor will be interrupted.
-- Make sure the wiper blades are not frozen if there is a risk for frost.
Service position via windshield wiper switch:
-- Switch the ignition off.
-- Press the windshield wiper switch toward "one-touch wiping".
- The windshield wipers run in the "service position".
Service position via MMI:
-- Turn off windshield wiper.
-- Select the menu item "Service Position" via the multimedia system control head. Refer to Vehicle Owner's Manual.
- The windshield wipers run in the "service position".
Continuation for all:
CAUTION:
Risk of damaging the front lid by moving the windshield wipers back to the basic setting.
- Never maneuver a vehicle with the windshield wiper arms folded up.
TIP:
At a speed of 12 km/h (7.5 mph) or when operating the windshield wiper switch, move the windshield wipers back into the home position.