Overview - Windshield Wiper System, Rain/Light Recognition Sensor
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Silicone Pad
- Replace after removing
- Retaining Plate
- For the Rain/Light Recognition Sensor -G397-
- Attached to the windshield
- Clip
- Rain/Light Recognition Sensor -G397-
- There are different versions. Refer to the Parts Information for the allocation.
- Removing and Installing. Refer to Rain/Light Recognition Sensor -G397-, REMOVING AND INSTALLING .
- Replacing. Refer to Rain/Light Recognition Sensor -G397-, REPLACING .