Washer Fluid Reservoir Filler Neck, Removing And Installing, RS3: Installing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Slide the grommet -3- all the way onto the filler tube for the filler neck -1-.
- The tab -2- must fit into the opening -arrow- on the filler tube.
-- Insert the filler neck into the washer fluid reservoir.
-- Pay attention that the gasket -5- is not crushed when sliding it in the washer fluid reservoir -4-.