Rear Window Wiper Motor -V12-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Insert the new grommet -2- into the rear window -1-.
- The marking -3- must face upward.
- The washer fluid hose must engage audibly in the washer nozzle connection.
-- Adjust the wiper arm. Refer to WIPER ARM, ADJUSTING .