Spray Nozzles, Removing And Installing, S3: Removing

WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the cover for the headlamp washer system spray nozzle. Refer to OVERVIEW - BUMPER COVER .

Left Side of Vehicle:

-- Remove the washer fluid reservoir. Refer to WASHER FLUID RESERVOIR, REMOVING AND INSTALLING .

-- Press the release buttons on both sides and remove the washer fluid hose -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the washer nozzle -2-.

Right Side of Vehicle:

-- Remove the right front air intake grille. Refer to OVERVIEW - BUMPER COVER .

-- Remove the front wheel housing liner. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .

-- Carefully unclip the air routing -1- to the outer side from the radiator in the direction of -arrow- and leave in installation position.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -arrows- and auxiliary radiator -2- with bracket -1- and move to the side.

Courtesy of AUDI OF AMERICA, LLC

-- Press the release buttons on both sides and remove the washer fluid hose -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the washer nozzle -1-.