Dust Cap, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Brake caliper piston is driven back.
- The parking brake motor is removed. Refer to LEFT AND RIGHT PARKING BRAKE MOTOR -V282- / -V283-, REMOVING AND INSTALLING .
- Install the entire repair kit when servicing.
CAUTION:
There is a risk of destroying the ball thread by removing from the brake caliper piston and thrust nut.
- Never completely remove the brake caliper piston and thrust nut.
-- Remover thee brake caliper piston maximum 20 mm -dimension a- whit the :T10621 counter-clockwise -arrow-.
-- Remove the protective cap from the brake caliper using the :3409 .