Dust Cap, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- To clean only use mineral spirits.
-- Clean the surfaces on the brake caliper piston and brake caliper using mineral spirits and then dry.
-- Place the protective cap in the groove -arrow- on the brake caliper piston.
-- Install the brake caliper piston clockwise -arrow-.
-- Push the protective cap onto the brake caliper using the :T10502 -item 2- and :T10145 -item 1- so that the protective cap is touching the brake caliper all the way around.