Bearing Bushing And Guide Pin, Replacing: Installing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Lubricate the guide pin before inserting.
-- Slide the bearing bushing over the groove on the guide pin.
-- Slide the guide pins -3- with the bearing bushings -2- through the brake carrier -1-.
-- Press the bearing bushing over the groove on the brake carrier.