Fan Shroud, Removing And Installing, 2.9L Engine: Installing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Used coolant cannot be used again.

-- Install the charge air cooling circuit cooler. Refer to CHARGE AIR COOLING CIRCUIT COOLER, REMOVING AND INSTALLING .

-- Install the bumper cover end plate and the lock carrier cover. Refer to OVERVIEW - BUMPER COVER .

-- Connect the plug/coolant hose with the connector. Refer to Figure.

-- Fill with coolant. Refer to Coolant, Filling .