Overview - Coolant Pipes, 2.9L Engine-Side
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- The marking on the coolant pipes and ends of coolant hoses must align.
- Left Front Coolant Pipe
- Removing and Installing. Refer to LEFT FRONT COOLANT PIPE, REMOVING AND INSTALLING, 2.9L ENGINE .
- Bolt
- 9 Nm
- O-Ring
- Replace after removing
- Bolt
- 9 Nm
- Front Coolant Pipe
- Replace after removing
- Removing and Installing. Refer to FRONT COOLANT PIPE, REMOVING AND INSTALLING, 2.9L ENGINE .
- Bolt
- 9 Nm
- O-Ring
- Replace after removing
- O-Ring
- Replace after removing
- Bolt
- 9 Nm
- Connection
- O-Ring
- Replace after removing
- Bolt
- 9 Nm
- Bolt
- 9 Nm
- O-Ring
- Replace after removing
- Large Right Rear Coolant Pipe
- Removing and Installing. Refer to LARGE RIGHT REAR COOLANT PIPE, REMOVING AND INSTALLING, 2.9L ENGINE .
- Clamp
- Bolt
- 9 Nm
- O-Ring
- Replace after removing
- Bolt
- 9 Nm
- Clamp
- Bolt
- 9 Nm
- Small Right Rear Coolant Pipe
- Removing and Installing. Refer to SMALL RIGHT REAR COOLANT PIPE, REMOVING AND INSTALLING, 2.9L ENGINE .
- Bolt
- 9 Nm
- O-Ring
- Replace after removing
- Rear left coolant pipe
- Removing and Installing. Refer to LEFT REAR COOLANT PIPE, REMOVING AND INSTALLING, 2.9L ENGINE .
- Bolt
- 9 Nm
- O-Ring
- Replace after removing
- Bolt
- 9 Nm
- Connection
- O-Ring
- Replace after removing
- O-Ring
- Replace after removing
- Bolt
- 9 Nm