Lower Coolant Pipe On Transmission, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Remove the bolts -arrows- and nut -2-.

-- Remove the crossbrace end plate -1-.

-- Clamp off the coolant hoses -1 and 2- with the Hose Clamps - Up To 25mm:3094 and remove them. To remove, loosen the how clamps.

Fig 1: Lower Coolant Pipe on Transmission - Tightening Specification

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the coolant pipe.