Left Rear Coolant Pipe, Removing And Installing, 3.0L Engine: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .
-- Install the engine cover and heat shield. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Vehicles with particulate filter: remove the rear noise insulation. Refer to OVERVIEW - NOISE INSULATION .
-- Remove the bolts -arrows-.
-- Loosen the hose clamp -1- and remove the coolant pipe -2-.
-- If necessary, free up the wiring harness.