Left Coolant Pipe On SUBFRAME, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

2.9L Engine:

-- Lower the subframe. Refer to appropriate Service Information .

3.0L Engine:

-- Remove the left engine mount. Refer to LEFT ENGINE MOUNT, REMOVING AND INSTALLING, 3.0L ENGINE .

Remove the bolts -arrows-.

Courtesy of AUDI OF AMERICA, LLC

Continuation for All:

-- Place a cloth underneath to catch any escaping coolant.

-- Clamp off the coolant hoses using the Hose Clamps - Up To 25mm:3094 .

-- Loosen the hose clamp -1-, lift the clamp -2- and remove the coolant hoses.

-- Remove the left coolant pipe.