Cylinder Bank 2 (Left) Camshaft Housing, Removing And Installing: Notes

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Sliding Hammer :T10133/3 from the Injector/Combustion Chamber Seal Tool Set :T10133C

Fig 1: Identifying Injector/Combustion Chamber Seal Tool Set
Courtesy of AUDI OF AMERICA, LLC
Camshaft Adjustment Pins :T40060 (with the engine installed)

Fig 2: Camshaft Adjustment Pins T40060
Courtesy of AUDI OF AMERICA, LLC
Locating Pins :T40116

Fig 3: Identifying Locating Pins T40116
Courtesy of AUDI OF AMERICA, LLC
Hand drill with plastic brush insert
Protective Eyewear
Sealant. Refer to the Parts Information.
M8x25 Bolts (quantity 2)