Main Fuse Panel On Battery A, Removing And Installing: Removing
-- Lift the luggage compartment floor cover.
A6 Avant, A6 allroad
-- Remove the dirt tray.
Continuation for all vehicles
-- If installed, remove the spare tire and vehicle tool kit mount.
-- Remove the nuts -3- and -4-.
-- Remove the bolts -1- and -5-.
-- Remove the retaining bracket -2-.
-- Loosen the nut -1- and remove the Battery Monitoring Control Module -J367- -2-.
-- Open the cover -1- over the battery positive terminal.
-- Loosen the nut -3- and remove the main fuse panel -2-.
-- Release the catch and open the flap above the main fuse panel -3-.
-- Remove the wires -1-, -2- and -4- through -7-.
-- Release the latches and open the flap -3- -arrow-.
-- Disconnect the connector -1- from the cut-off relay -2-.
-- Remove the main fuse panel.
-- Remove the battery interrupt igniter. Refer to BATTERY INTERRUPT IGNITER, 48 VOLT, N751, REMOVING AND INSTALLING .