LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 290 (Engine Assembly (6-Cylinder Direct Fuel Injection 2.9L; 3.0L 4V TFSI Engine Ea 839)) >> 10 Engine Assembly >> Assembly Mounts >> Engine Mount, Removing And Installing >> Left Engine Mount, Removing And Installing, 2.9L Engine >> Removing

Left Engine Mount, Removing And Installing, 2.9L Engine: Removing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Lower the subframe. Refer to appropriate Service Information .

-- Disconnect the connector -arrow- for the electrohydraulic engine mount solenoid valves.

Fig 1: Left/Right Electrohydraulic Engine Mount Solenoid Valve -N144- / -N145- Component Location
GWWA10-12011Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and engine mount -1-. (Shown on the right.)

GWWA10-11883Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals