4-Cylinder Gasoline Engine 2.0L TFSI

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Removal Procedure:

-- Carefully pull the engine cover off of the retaining pins -arrows- one after the other.

Fig 1: Engine Cover 2.0L TFSI

Courtesy of AUDI OF AMERICA, LLC

Installation Procedure:

-- To avoid damage, do not hit the engine cover with fist or a tool.

-- Be careful when attaching the engine cover onto the oil filler tube.

-- Using both hands, first press the engine cover in the rear onto the pins, and then, using both hands, press the engine cover in the front into the pin.