Vehicle Diagnosis, Closing And Sending The Diagnostic Log
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Perform the test programs according to the test plan.
-- Switch to the control modules tab.
-- Press the X Diagnosis button and end the diagnosis.
-- Send the diagnostic log online.
NOTE:
Deleting the DTC memory takes place when exiting the Guided Fault Finding ,
Sending the diagnostic log takes place when exiting the Guided Fault Finding ,
If there is no network connection available, the diagnostic log is temporarily saved a few days. The online transfer should then take place as soon as possible.