LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 288 (General Information) >> IGG Title >> Maintenance Work >> Service Disconnect, Check For Contamination And Damage

Service Disconnect, Check For Contamination And Damage

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Hybrid vehicles have a high-voltage system with a very high voltage. Risk of electrocution. Note the safety precautions! Refer to WARNING MESSAGES FOR HIGH-VOLTAGE VEHICLES 

  • All work on vehicles with a high-voltage system may only be performed by technicians that are certified as "technicians trained in electrical systems".
  • Contact to the responsible high-voltage technician or expert if something needs clarification.

The High-Voltage System Maintenance Connector (Service Disconnect) is located in the engine/motor compartment to the left in front of the engine/motor control module.

-- Visual inspection of the connector

The High-Voltage System Maintenance Connector must not show any damage during the inspection.