LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 286 (Bumpers) >> 63 Bumpers >> Front Bumper >> Molded Foam Part, Removing And Installing >> Installing

Molded Foam Part, Removing And Installing: Installing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Install the pressure hose sensor for front pedestrian protection. Refer to PRESSURE HOSE SENSOR FOR FRONT PEDESTRIAN PROTECTION G579, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals