Front Spoiler Upper Section, Removing And Installing, A6 ALLROAD: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the impact guard. Refer to IMPACT GUARD, REMOVING AND INSTALLING .
-- Remove the side air duct. Refer to SIDE AIR DUCT, REMOVING AND INSTALLING, A6 ALLROAD .
-- Remove the bolts -1 and 3-.
-- Release the retainer -2-.
-- Open the cover -arrow- and remove the securing bracket -4-.
-- Warm up the front spoiler -5- with the Wiring Harness Repair Set - Hot Air Blower :VAS 1978/14A near the bonding -3-.
-- Disengage the top of the front spoiler from the bumper cover -4- in direction of -arrow A- and loosen the bonding with the scraper in direction of -B arrows-.
-- Release the retainers -1 and 2-.
-- Remove the spoiler forward.