Center Air Intake Grille, Removing And Installing, A6 S Line, S6: Removing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Remove the bumper cover end plate. Refer to BUMPER COVER END PLATE, REMOVING AND INSTALLING .

-- Free up the wiring harness -3-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows-.

-- Release the catches -1 and 4-.

-- Remove the air intake grille -2-.

Version 1:

Courtesy of AUDI OF AMERICA, LLC

-- Free up the wiring harness -3-.

-- Pry out the clamps -1-.

-- Release the retainers -arrows-.

-- Remove the deformation element -2-.

Version 2:

Fig 1: Tightening specifications - deformation element, market-specific version

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1-.

-- Release the retainers -arrows-.

-- Remove the deformation element -2-.