Overview - Vacuum Pump, 2.9L/3.0L TFSI Engine

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Vacuum Pump, 3.0L TFSI Engine

Courtesy of AUDI OF AMERICA, LLC

Vacuum Pump
- Refer to VACUUM PUMP, REMOVING AND INSTALLING, 2.9L/3.0L TFSI ENGINE
Bolt
- 9 Nm
Seal
Vacuum Sensor -G608-
- For versions with a vacuum brake booster
- Refer to Vacuum Sensor -G608-, REMOVING AND INSTALLING
O-Ring
- For versions with a vacuum brake booster
- Cannot be replaced separately
- If damaged, replace the Vacuum Sensor -G608-
To the Vacuum Brake Booster
Vacuum Line
- For versions with a vacuum brake booster
- There are different versions. Refer to the Parts Information for the allocation.
- With integrated check valve; cannot be replaced separately
- Refer to CHECK VALVE, CHECKING
- Refer to CHECK VALVE, REMOVING AND INSTALLING, WITH VACUUM LINE IN PLENUM CHAMBER
Vacuum Line
- For versions with a vacuum brake booster