Overview - Vacuum Pump, 2.0L TFSI Engine
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Vacuum Pump
- Removing and Installing. Refer to VACUUM PUMP, REMOVING AND INSTALLING, 2.0L TFSI ENGINE .
- Seal
- Replace after removing
- Vacuum Hose
- Replace if damaged
- Bolt
- 8 Nm +180°
- Replace after removing
- Vacuum Line
- From EVAP Canister Purge Regulator Valve 1 -N80- to EVAP canister
- Bolt
- 9 Nm
- Bolt
- 9 Nm
- Bolt
- Tightening specification. Refer to OVERVIEW - HIGH PRESSURE PUMP .
- High Pressure Pump
- Removing and Installing. Refer to HIGH PRESSURE PUMP, REMOVING AND INSTALLING .
- O-Ring
- Replace after removing