Brake System Pressure Reservoir -VX70-, PRE-BLEEDING

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Bleeder bottle

Fig 1: Brake Charger/Bleeder Unit VAS5234
Courtesy of AUDI OF AMERICA, LLC

Procedure

-- Brake System Pressure Reservoir -VX70-, Installing and Connecting. Refer to Brake System Pressure Reservoir -VX70-, REMOVING AND INSTALLING .

-- Attach the bleeder bottle -3- to the Brake System Pressure Reservoir -VX70- -1- with a suitable bleed hose.

Courtesy of AUDI OF AMERICA, LLC

-- Open the bleed screw -2-.

-- Fill brake fluid until it comes out of the bleed screw at the pressure reservoir without bubbles.

-- Close the bleeder screw.